lobioff.blogg.se - Led projector retrofit

Led projector retrofit drivers#
Led projector retrofit free#

Now comes mounting the projectors (or retrofitting).

Then use a large flat head screwdriver to pry the ball joint out of its socket. Loosen (counter clockwise) the adjustment screws in the headlight alternately until the little ball joint has tension on it. Cut the sealant immediately with a sharp knife as it comes apart. Remove them and then using a flat head screwdriver, pop the clips loose as you pry the lens away from the black housing and the sealant should stretch. Take your bulbs out FIRST! Use the oven method to remove the headlight lenses: Preheat oven to 200 degrees, then turn it off, put a cotton towel in the oven and set the headlights (one at a time) on the towel. Unplug the headlight harnesses and remove the headlights.

Unbolt the headlights! There are 3 stainless bolts:.

Led projector retrofit free#

There are 2 clips above the side markers that must pop straight out to come off and then it clips under the headlights, pull forward after you get the side clips free and off it comes! Now store it somewhere safe inside!

Use two people and slowly work the bumper cover off.

Remove the two phillips-head bolts (8mm) that hold the bumper cover to the wheel well (you may have to pull the black plastic wheel well cover up some to get to this screw).

Raise the front of the car enough to get under it and take the 6 bolts out that hold the bumper cover from underneath (all bolts are 10mm, use a socket ratcheting wrench).

Remove the honeycomb grill (2 bolts and a couple plastic clips).

Contact us today with any questions you won’t regret it!Ģx Projectors: i.5th Gen Prelude Headlamp Retrofit using 2.5" Valeo (Audi A4) H7 or D2S projectors (Retrofit done by JLUDE - originally posted on ): We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance.

Led projector retrofit drivers#

Wiring: The LED drivers powering up these projectors pull minimal amps you don't technically need a wiring harness.Ĭonfidence: Order with confidence when purchasing through our website. They also come with a waterproof connector that attaches to the output line of the projector.

So no parts to maintain on these new LED setups.ĭrivers: The drivers powering up the projectors are very compact. With HID, you lose performance as the bulb is bing used over the years. They fire right up and their performance will remain the same for the entire life of the unit. This gives more precision and adjustability when performing the conversion. Easy as that! Mounting hardware included!īrackets: Want to mount like a big boy? You can use the projector brackets to mount using the "nut and bolt" method. On other applications, not H7 or H4 based, you may simply need to open up the mounting slightly to get the lock ring and adapter plate on. Color temperature is rated at 5500K - Pure white!Įasy to Install: Just like the other thread-on options we offer, this unit will bolt right up directly to any H7 or H4 based reflector. CREE XHP-35 LED's power up these amazing projectors. Size wise it's nearly the same as the Morimoto D2S 4.0 and the G5-R so you know it's pretty compact! The units come preinstalled with clear lens for maximum output and a nice sharp colorful cutoff line.

What is it? It's the most powerful LED projector we have tested hanging right there with the top HID projectors when using high performance D2S bulbs at 35W.